Table of Contents 1: Get started . . . . . . . . . . . . . . . . . . . . . . 1. 2. 3. 4. 5. 6. 7. 8. 9. 3 Standard package contents . . . . . . . . . . .3 Phone specification . . . . . . . . . . . . . . . . . 3 Phone description . . . . . . . . . . . . . . . . . . 4 Installing & removing the battery . . . . . . . 5 Charging the battery . . . . . . . . . . . . . . . . 6 Powering the Cyber phone on & off . . . . 7 Display indicators & icons . . . . . . . . . . . . 8 Shortcut menu . . . . . . . . . . . . . .
iv Settings . . . . . . . . . . . . . . . . . . . . . . . 32 1) Clock . . . . . . . . . . . . . . . . . . . . 34 2) Wallpaper . . . . . . . . . . . . . . . . . 36 3) Ring tones . . . . . . . . . . . . . . . . 36 4) Message tones . . . . . . . . . . . . . 37 5) Ring Volume . . . . . . . . . . . . . . . 37 6) Receiver volume . . . . . . . . . . . 37 7) Alert mode . . . . . . . . . . . . . . . . 38 8) Message View . . . . . . . . . . . . . 38 9) Brightness . . . . . . . . . . . . . . . .
1: Standard Package Contents 2: Phone Specifications The CYBERPHONE is a 802.11b/g VoIP WiFi SIP Phone. Please check carefully if you have the items mentioned below: Dimensions: 96(L) x 65(W) x 16(H) Dimension in mm. 1: WiFi Phone x 01 Weight: 65g (without battery) 80g (with battery) Battery: 650 mAh Li-ion, 3.7v Charger Input: 100-240v – 50-60Hz 0.
Get Started 3: Phone Description Volume up key Earpiece OLED screen Volume down key Left soft key Right Soft Key Talk / Call key End / Power key 5 Way joystick Number keys Silent mode key Switch input method key / keypad lock.
Installing and Removing the battery 3. To remove, lift the battery out from here 1. Push and hold the battery door button down. 2. While the button is pushed down, push from the top and slide the battery door cover outwards. Battery Get Started 4: Contact point 4. To install the battery, ensure that the contact points are aligned. 5. Insert the direction shown in the diagram FIRST. Re-attach the battery door. * Please refer to page.69 for more information on your battery.
Get Started 5: Charging the battery 1. Plug the USB cable into the charger or to a computer USB port. 2. Insert the charger into your wall power outlet. 4. Plug the other end of the USB cable in and turn on the main power to begin charging With the phone turned on/off, this Screen will appear when the phone is charging. OR This icon will scroll on the idle screen if its turned on. 3. Locate the USB port at the bottom of your phone.
Powering the Cyber phone on and off - To Power ON Press and hold the (end/off key icon) Get Started 6: for 5 seconds, release and the power up window will be shown. 1.0.02 Fig.1 Power up window - To Power OFF Press and hold the (end/off key icon) and the power down window will be shown. for 3 seconds, release Fig.
Get Started 7: Display indicators and icons Idle Screen Received signal strength from WiFi access point. (Weak Strong) 2.59P Time display Call mute (Un-mute, Mute) Keypad lock To lock, press and hold for 1 second. To unlock, press and hold for 1 second. Message Inbox (new, read, sent, not sent) Alert type (ring, ring and vibrate, silent, vibrate only) WiFi connectivity status (refer to pg.
Shortcut menu allows a quick access to the configuration setting menu of your phone. Site Scan : Allows you to scan and join the list of APs available in your network LAN SIP Registration : Allows you to activate or reconnect your SIP account on the Cyber WiFi phone Reload IP : This function allows you to request an IP address from a DHCP server Restart WLAN : This function restarts the phone’s wireless connection to the AP.
Get Started 9: Main Menu Icons Individual icons will illuminate when selected. Navigate your way around the icons by moving the joystick. Press the joystick down to select the application. Message: Contacts: Call Log: Settings: Config: Info: 10 Use the messages menu to send and receive short messages. Store and find from a list of contacts stored in your contact list.
1: Important information you should know first - Possible ways of communicating using the CYBERPHONE. - IP to IP call - SIP to SIP call Note: You will need to subscribe with a SIP service provider to make a SIP call. For reference please refer to www.daviscomms.com.sg - Requirements in order to establish a communication on the CYBERPHONE. Configuring Your Phone 2. Configuring your phone - The phone must be associated to an AP in order to communicate to other WiFi phones.
Configuring Your Phone - SIP Server connection - A SIP connection allows you to communicate to another SIP user via a WiFi phone without having the hassle to remember the full length of the IP address number. Note: - Before you can connect to a SIP server, it is necessary that you obtain a SIP account. You can also obtain a paid SIP account which provides you communication to a mobile phone number (GSM) or a landline number (PSTN). For reference please refer to www.daviscomms.com.
Connecting your phone to an AP Auto Connecting to an AP Before you proceed to making a call, you will first need the CYBERPHONE to connect to an AP. Your phone will automatically detect and connect to your pre-configured AP on the first power up. Manually setting up the phone to connect to an AP in your LAN network Step.
Configuring Your Phone 3: Connecting your phone to an SIP Note: - Before you proceed to making a call, you will first need to set up the CYBERPHONE to register to a SIP server connection. For reference please refer to www.daviscomms.com.sg Step.1 - From the idle screen, select > MENU > CONFIG > SIP > USER NAME > input your user name according to your SIP account details and select > OK. Step.
1: Making an IP to IP call (via direct IP) For eg:- 1234567@191.166.123.203 These figures are defined by the recipient’s user name In the SIP settings. These figures refers to recipients FIXED IP number SPEAKER Note: Please make sure to disable the SIP settings before making an IP to IP call. To do so, please follow the steps below: Fig.5 Calling Screen Basic Call Functions 3.
Basic Call Functions 2: Making a SIP to SIP call (via SIP server) Note: A user can only call to the other party via the same SIP provider. Please refer to your SIP provider’s agreement if you are contacting another person of another SIP provider account. Do make sure that your SIP settings are activated. (Refer to Pg.14) 31080240 For eg:- These figures will be the other parties SIP phone number you wish to dial. Step.1 - Key in the SIP contact number Step.
Making a call ( via SIP server to Landline / GSM Mobile Phone) Note: You can only call a Landline / GSM Mobile phone line depending on your SIP Server account services. For reference please refer to www.daviscomms.com.sg Do make sure that your SIP settings are activated. (Refer to Pg.14) Note: For eg:- 65 62100123 Country code Basic Call Functions 3: Land line number or mobile number Step.1 - Key in the number, for eg:- 6562100123 Step.2 - Press and “calling 6562100123” will be displayed. Step.
Basic Call Functions 4: Speed dial - Refer to page.29 for the setting up of speed dial. - During standby mode, press and hold the preset key for 1 second to display the name and phone number, press left 5: soft key to call. Answering a call SILENT SPEAKER Fig.7 Incoming call screen - Press the 6: key to answer incoming calls. Call timer will be displayed. Mute/Un-mute a Call - During a call is answered, click on options> scroll to mute and click select.
Rejecting a call - When there is an incoming call, press the key to reject the call. - Number of missed calls will be displayed. Press the left soft key to VIEW view the missed call. EXIT Fig.8 Missed call screen 10: Silencing the incoming ring tone - When there is a incoming call, press the left soft key > select SILENT. Basic Call Functions 9: 11: Call waiting - When another call comes in during a call, it will give a waiting tone.
Menu - Message 4. Menu Menu – ( i ) Messages Create Allows you to create messages and send it to another party. Inbox and Outbox Allows to you view, edit and delete the messages. - Read Allows you to read the messages. - Reply Allows you to reply the messages you read. - Forward Allows you to forward the message you read to another party. - Delete Allows you to delete the message you select. - Delete All Allows you to delete all messages.
Keypad Legends Press repeatedly to scroll through various punctuations. Press repeatedly to scroll between ( . @ : ) Hold to display the symbol table Press repeatedly to scroll through the corresponding letters.
Menu - Message Tip: You can create new messages or check your message inbox by selecting the (2) icon or the icon at the idle screen. Create OK - Select MENU > MESSAGES > CREATE > type the message > select OK > key in a phone number and select > OK. OR select CONTACTS to pick an existing contact in your phonebook and send. Note: You can also select MESSAGES from the idle screen by scrolling up or down with the joystick and selecting it by pressing the center of the joystick.
(3) Inbox Menu - Message - Select MENU > MESSAGE > INBOX. Note: You will be notified if there is a new message in your inbox from the idle screen by spotting the icon at the top of the idle screen. Note: Messages in the Inbox can be viewed. The arrangement of messages is latest (TOP) to earliest (BOTTOM) These are the following menus found when you access the INBOX. YES Inbox: NO Fig.
Menu - Message Inbox: Delete - From the MESSAGES menu > select INBOX > select the message you want to delete > OPTIONS > DELETE > select YES to confirm or NO to cancel. Inbox: Delete All - From the MESSAGES menu > select INBOX > OPTIONS > DELETE ALL > select YES to confirm or NO to cancel. Note: All messages will be deleted permanently. 24 YES NO Fig.
(4) Outbox Note: Messages in the Inbox can be viewed. The arrangement of messages is latest (TOP) to earliest (BOTTOM). Outbox: Read - From the MESSAGES menu > Select OUTBOX > Select the message you want to read > press the center of the joystick Outbox: to read the message. YES NO Menu - Message - Select MENU > MESSAGE > OUTBOX > Fig.13 Delete Message Screen Forward - From the MESSAGES menu > select OUTBOX > select the message you want to forward > OPTIONS > FORWARD.
Menu - Message (5) Chat Note: The chat session can function on a IP to IP connection or a SIP to SIP connection. Please check with your SIP provider if their service support messaging capability. - Select MENU > MESSAGES > CHAT MENU CONTACTS Fig.15 Banner Screen - Chat - Enter the phone number of the recipient which you want the CHAT session to be associated with. - Contacts can be retrieved from the phonebook. Select OK. - For e.g:- INVITING 12345678 @ xxx.xxx.xxx.
Add Allows you to add a new contact into your contact list. Edit Allows to you edit the contact which is stored in your contact list. Delete Allows you to delete a contact permanently from your contact list. Speed Dial Allows you to set a particular contact to a numeric key on your keypad. Adding a Contact from Idle Screen Allows you to add a new contact directly from the idle screen.
Menu - Contacts (1) Add To add from Contacts: - Select MENU > CONTACTS > OPTION > ADD > ( Input name ) > OK ( Input Phone Number ) > OK. To add from Call Log: - Select Call Log > select either Missed Calls, Incoming Calls or Outgoing Calls > highlight the number, select OPTION > SAVE > ( Enter name ) > APPLY. Fig.18 CONTACT Selected To add from Idle Screen: From the idle screen, key in the number of the CONTACT > click SAVE > Input the name of the Contact > Click OK once done.
Menu - Contacts ( 3 ) Delete - Select CONTACTS > select the person you want to delete > OPTION > DELETE > select YES to delete or NO to cancel. (4) View Entry - Select CONTACT > select a contact from the list > push joystick button (5) down to VIEW. Speed Dial - Select CONTACTS > select a contact from the list > OPTION > SPEED DIAL > SET. - To Unset, scroll to the Key number and press UNSET. - If you have a contact under key.
Menu – Call Log Menu – ( iii ) Call Log Missed Calls Incoming Calls Outgoing Calls Shows you the list of the numbers you have called, received or missed picking up their call. Selecting the particular contact allows you to save the particular contact in your list, delete or delete all contacts. Recent Calls Recent Calls 30 Shows you the summary list of the your outgoing, answered or missed calls.
Missed Calls - Select MENU > CALL LOG > MISSED CALLS. To Save, Delete or Delete All, select an entry and select OPTIONS. Note: Missed call list will appear from latest (top) to earliest (bottom). (2) Fig.22 Call Log Selected Menu – Call Log (1) Incoming Calls - Select MENU > CALL LOG > INCOMING CALLS. To Save, Delete or Delete All, select an entry and select OPTIONS. Note: Incoming call list will appear from latest (top) to earliest (bottom). OPTION BACK Fig.
Menu - Settings 32 Menu – ( iv ) Settings Clock Allows you change the time, date and its formats. - Set Time Allows you to set the time which will be displayed on the idle screen - Set Date Allows you to set the date which will be displayed on the idle screen. - Time Format Allow you to set the time format to be 12 or 24 hours. - Date Format Allows you to set the date format to DD/MM/YY or MM/DD/YY. Wallpaper Allows you to change the wallpaper in the idle screen.
Allows you to set the keypad light to stay Off, after 10, 20 or 30 seconds. Auto Key Lock Allows you set the Auto Key Lock feature to off, 30secs, 1min and 2mins. Key Tone Allows you turn the key tone On or Off when the keys are pressed. DTMF Tone Allows you to set the DTMF tone to inbound or outbound. Screen Banner Allows you to type in a banner message in the idle screen. Factory Reset Allows you to set the entire phone back to its original factory settings.
Menu - Settings (1) Clock Clock: Set Time Format: HH/MM = HOUR/MINUTE - Select MENU > SETTINGS > CLOCK > SET TIME > key in the current time. Fig.24 Setting Selected OK BACK Fig.
Set Date Format: DD/MM/YYYY = DAY / MONTH / YEAR - Select MENU > SETTINGS > CLOCK > SET DATE and key in the current date OK BACK Fig.
Menu - Settings Clock: Time Format - Select MENU > SETTINGS > CLOCK > TIME FORMAT > select either 12 Hour or 24 Hour and choose SELECT. Clock: Date Format SELECT - Select MENU > SETTINGS > CLOCK > DATE FORMAT > select either DD / MM / YY or MM / DD / YY and choose SELECT. (2) BACK Fig.27 Time Format Setting Screen Wallpaper - Select MENU > SETTINGS > WALLPAPER > select the wallpapers of your preference by scrolling the joystick in any direction, and choose SELECT.
Message Tones - Select MENU > SETTINGS > MESSAGE TONES > select the ring tone of your preference by scrolling the joystick up or down , a preview of the message tone you choose will be played. Choose SELECT to set. SELECT BACK Fig.30 Message Tone Setting Screen (5) Menu - Settings (4) Ring Volume - Select MENU > SETTINGS > RING VOLUME > increase or decrease the volume by scrolling either direction of the joystick > choose SELECT to set. SELECT BACK Fig.
Menu - Settings (7) Alert Mode - Select MENU > SETTINGS > ALERT MODE > select the alert mode of your preference by scrolling the joystick up or down , choose SELECT to set. Note: The following alert icons will appear on the idle screen depending on your selection. SELECT Ring Only: BACK Fig.33 Alert Mode Setting Screen Vibrate Only: Ring and Vibrate: Silent: (8) - Message View Select MENU > SETTINGS > MESSAGE VIEW > to view message through Fig.
Key Backlight - Select MENU > SETTINGS > KEY BACKLIGHT > select the backlight timer of your preference by scrolling the joystick up or down , choose SELECT to set. Fig.36 Key Backlight Setting Screen Menu - Settings ( 10 ) ( 11 ) Auto Key Lock - Select MENU > SETTINGS > AUTO KEY LOCK > select the key lock timer of your preference by scrolling the joystick up or down . Choose SELECT to set. SELECT ( 12 ) Key Tone BACK Fig.
Menu - Settings ( 14 ) Screen Banner - Select MENU > SETTINGS > SCREEN BANNER > key in your message, > choose OK to set. Note: You can input up to a maximum of 12 Characters. Fig.39 Banner Message at Idle Screen APPLY CLEAR Fig.40 Banner Message ( 15 ) Factory Reset - Select MENU > SETTINGS > FACTORY RESET > choose YES to reset, or NO to cancel. Note: The phone will reboot and turn off. 40 OK BACK Fig.
Software Upgrade - TFTP Server Note: During the Software upgrading, in your computer, make sure that under CONTROL PANEL > NETWORK CONNECTION, the Local Area Connection of the CYBERPHONE is present. Please also take note of the IP address at the startup screen You should only start your TFTP program after this. Menu - Settings ( 16 ) Software Upgrade Important: Do not disconnect the phone from the PC while it is in firmware upgrading progress. Doing so will permanently damage the phone.
Menu - Settings Step:5 - Configure the new Local Area Connection and set the IP settings to the following: Step:6 – Download and install TFTP program from http://tftp32.jounin.net/tftp32_download.
Menu - Settings Step:7 - After installation, set the settings of the TFTP program to be: Step:8 - On the CYBERPHONE, in the FIRMWARE UPGRADE menu, choose the appropriate software part (upgrade firmware, upgrade web config or upgrade bootloader) you want to upgrade. Once you choose an option, the phone will start to download the file. Fig.
Menu - Settings Step:9 - After downloading the file, the phone will install the required file. Step:10 - When the phone has successfully installed the file, the phone will display a screen to inform you that the firmware upgrade is completed. Step:11 - Press and hold the Power Fig.43 Image Installing Screen new firmware should have been installed. Note: 44 key for 3 seconds and release. The If there is an error during the firmware upgrading, an error screen will appear.
The Session Initiation Protocol (SIP) is an application-layer control (signaling) protocol for creating, modifying, and terminating sessions with one or more participants. Display Name Allows you to key in the user name for display purposes. User Name Allows you to key in the user name of you SIP account. Passwords Allows you to key in the password of your SIP account. Proxy Server Allows you to request a server which services the requests of its clients by making requests to other servers.
Menu - Configuration ( 1 ) SIP Settings Note: To change the settings, press the center of the joystick. To activate, press the left soft key. Note: You have to configure both SIP Proxy Server settings and Outbound Proxy server settings. Please refer to your SIP service provider for your account details. For reference please refer to www.daviscomms.com.sg Step.1 - Select MENU > CONFIG > SIP SETTINGS > DISPLAY NAME > for eg:key in User > select OK. Fig.45 Config Selected Step.
Step.6 – In Proxy Server menu > REGISTRATION TIME > for eg:key in 3600 > select OK. Step.7 - In the same SIP settings menu > OUTBOUND PROXY > IP ADDRESS > for eg:- key in 192.168.2.1 > select OK. APPLY CLEAR Fig.47 IP Address Screen Note: The outbound proxy server is the address and port that your phone uses to connect to a SIP server, where there may be NAT routers that do not support the SIP protocol.
Menu - Configuration Step.11 - In the same SIP settings menu > SIP KEEP ALIVE > Key in the SIP KEEP ALIVE time for eg:- 20Seconds and choose ENABLE and select it. Note: This is to overcome the NAT barrier so that the phone is contactable by a previously contacted external party. Step.12 - Return to SIP SETTINGS menu > AUDIO CODEC > for eg:choose G711-A and select it. Fig.48 Audio Codec Screen Step.13 – After the configuration, select > ACTIVATE.
IP Settings Internet Protocol (IP) is a data-oriented protocol used for communicating data across a packet-switched network. DHCP DHCP ( Dynamic Host Control Protocol ) is a set of rules used by communications devices such as a computer, router or network adapter to allow the device to request and obtain an IP address from a server which has a list of addresses available for assignment. Fixed IP Setup - IP Address Allows you to key in your fixed IP Address of a network.
Menu - Configuration (2) IP Settings IP Settings: DHCP Settings Step.1 - Select MENU > CONFIG > IP SETTINGS > DHCP > select ENABLE. IP Settings: Fixed IP Settings Note: With this option you have to manually enter an IP address, subnet mask and gateway IP address. These are given to you by the network administrator. ACTIVATE BACK Fig.49 DHCP Notice Screen Follow the procedure below to do this.Only when the DHCP is disabled, can the IP option be available.
Step.6 - In FIXED IP menu > SECONDARY DNS > for eg:key in 165.21.100.88 > select OK. OK CLEAR Fig.51 DNS Input Screen Menu - Configuration Step.5 - In FIXED IP menu > PRIMARY DNS > for eg:key in 165.21.83.88 > select OK.
Menu - Configuration 52 (3) WLAN Settings WLAN is a wireless local area network, which is the linking of two or more peripherals without using wires. WLAN utilizes spread-spectrum or OFDM Modulation technology based on radio waves to enable communication between devices in a limited area, also known as the basic service set. This gives users the mobility to move around within a broad coverage area and still be connected to the network.
ACTIVATE BACK Fig.52 WLAN Scanning Screen VIEW Menu - Configuration Step.1 - Select MENU > CONFIG > WLAN > SSID > SCAN and a list of available AP’s will be displayed > select > VIEW on the selected AP you wish to connect> SELECT> OK. BACK Fig.53 AP List Screen Step.2 - In the same WLAN settings menu > ENCRYPTION > select the suitable security setting. For eg: None WEP-64 * WEP-128 WEP-TKIP WEP-AES Note: Choose the type of encryption and key with reference from your IT administrator.
Menu - Configuration 54 Step.3 - After selecting a security key type > Select Open system > choose KEY 1 > enter the KEY > click OK.. Note: If the KEY you have input is too short, a warning message will appear. WLAN: Transmit Rate - In the same WLAN settings menu > TRANSMIT RATE > for eg: select AUTO. OK CLEAR Fig.
To Auto Roam on a SP Profile - Go to > MENU > CONFIG > WLAN > AUTO ROAM > AP PROFILE > select a SSID (edit a SSID account) > OPTIONS > JOIN. To Edit a SSID Profile - In the same Auto Roam settings menu > AP PROFILE > select a SSID > OPTIONS > EDIT > key in a SSID > select a security setting. OPTIONS BACK Fig.56 Auto Roam Screen Menu - Configuration WLAN: Auto Roam To Delete a SSID Profile - In the same Auto Roam settings menu > AP PROFILE > select a SSID >OPTIONS > DELETE.
Menu - Information Menu – ( vi ) Information Information section provides the relevant information of the SIP, IP, WLAN and General settings. (1) SIP Information Fig.57 Info Selected - Select MENU > INFO > select SIP and choose SELECT to view its information. (2) IP Information - Select MENU > INFO > select IP to view your current connection details. BACK ( 3 ) WLAN Information Fig.58 IP Information Screen - Select MENU > INFO > select WLAN and choose SELECT to view its information.
The Web configurator is a special shortcut function of the phone where it allows the user to update or edit the phones settings via a web browser on their PC. Step 1 - Left click on the joystick to System info and retrieve IP address assign to the Cyber phone. Step 2 - Right click on joystick > scroll and select > WEB CONFIGURATOR. Web Configurator 5. Web Configurator Step 3 - Open a web browser in your PC and key in the IP address found on your Cyber phone from step 1 e.g. http://192.168.123.
Web Configurator 58 Step 4 - Enter “user” in User Name and key in “1234” as Password. Click Ok.
Web Configurator Step 5 - Your web browser will display the page as shown below under General Information 59
Web Configurator Step 6 - Under general information it contains software details of your phone. Your web browser will display the page as shown below under Contacts. This page allows you to view/add/edit/delete a contact to/from your phone.
Web Configurator Step 7 - Your web browser will display the page as shown below under Phone Settings.
Web Configurator Step 8 - Your web browser will display the page as shown below under SIP Settings. This page allows you to configure your SIP account settings to the phone, to register to a SIP server.
Web Configurator Step 9 - Your web browser will display the page as shown below under IP Settings. This page allows you to configure a fixed IP setting or set a DCHP setting to automatically assign an IP address for the phone to connect to the AP of the LAN.
Web Configurator Step 10 - Your web browser will display the page as shown below under WLAN Settings. This page allows you to set the AP details you require the phone to connect to.
Web Configurator Step 11 - Your web browser will display the page as shown below under IMPORT / EXPORT Step 12 - Click on System Reset once you have finalized the settings to complete the web configuration procedure 65
Web Configurator Step 13 - After clicking OK to reset the page will display as shown below After the progress has completed, the program will trigger your phone to switch off automatically. Step 14 - Turn on your phone again to connect to the AP of your LAN. Your phone will connect according to the settings you have configured in web configuration.
AP (Access Point) - A device that connects wireless communication devices together to form a wireless network. SIP (Session Initiation Protocol) - A application-layer control protocol for creating, modifying, and terminating sessions with one or more participants. These sessions include internet telephone calls, multimedia distribution and multimedia conferences. DNS (Domain Name Server) - The IP address of your ISP’s server, which translates the names of websites into IP addresses.
Health and Safety Information 7. Health and Safety Information Read these simple guidelines. Failure to comply may be dangerous or illegal. SWITCH ON SAFELY Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. QUALIFIED SERVICE Only qualified personnel may install or repair this product. ROAD SAFETY COMES FIRST Obey all local laws. Always free your hands to operate the vehicle while driving.
- When driving a car, driving is your first responsibility. When using your wireless phone while driving, follow local regulations in the country or region you are in. Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may wish to consult your hearing aid manufacturer to discuss alternatives.
Health and Safety Information 70 Precautions when using batteries Never use a charger or battery that is damaged in any way. - Use the battery only for its intended purpose. - Storing the battery above 45 degrees Celsius (113 degree Fahrenheit) is not recommended. - Battery charging time depends on the remaining battery charge, the type of battery, and the charger used. The battery can be charged and discharged hundreds of times, but will gradually wear out.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.