User's Manual

4: Understanding the Monitoring Mode
When the Base is turned on, it will automatically enter monitoring mode (Maximum 16 Tags).
During monitoring mode, the Base will search for all associated Tags, and indicate their approximate distance on the screen.
Main Screen (No Association)
This is the main screen in which the Base is not associated with any Tag.
4.1 Main Screen (Monitoring Mode)
When the Tags are associated with the Base, it will be displayed on the main screen when it is powered up.
Tags will be assigned an individual lane to move up and down according to their distance away from the base (full distance: ¼ Mile).
User will be able to set a level that represents a comfort zone (in distance) for all Tags via the comfort zone menu. (See Comfort Zone)
SelectMenu to display Main Menu.
Distance of Tag away from the Base
N: Near
M: Middle
F: Far
Page 15
Select Menu to display Main Menu.
Select Alert to enable or disable the outside comfort zone alert for all associated Tags.
(Comfort zone line will only appear if the option All Tags is chosen in comfort zone menu)
Select and to navigate between Tags.
Select to display Find Mode to locate highlighted Tag.
Comfort Zone for All Tags selected
Select and to move comfort zone line up and down.
Comfort Zone for individual Tag selected
Select and to go to comfort zone menu.
Note: In Monitoring Mode, you may notice that a Tag has disappeared. This could be due to environmental conditions. You should be able to find
the Tag again by rotating through a 360 degree angle as long as it is within range.
Example: