Specifications

10 Maintenance
Maintenance
• The ability of the radiation shield to keep fresh air flowing over the sen-
sors will be reduced if the shield plates become dirty. Clean the surfaces
of the shield plates periodically with a damp cloth.
• Keep areas between the shield plates free of debris that may obstruct air
flow. Examples are leaves, twigs, webs, nests.
• DO NOT remove nesting insects or animals by spraying insect killer of
any kind into the radiation shield. Chemicals could easily damage the
circuitry inside your temperature/humidity station.
4" Bolts
Plates
Mounting
Bracket
Temp/Humidity
Sensor
Lock Washers
Flat Washers
Opening the Radiation Shield for Cleaning