Product manual

Mounting the Repeater Page 9
Mounting the Solar-Powered Repeater
1. Mount the shelter against a wall or post, or on a pipe.
CAUTION: Remember to face the solar panel south in the Northern Hemisphere and north in the
Southern Hemisphere for maximum sun exposure.
✦
Wall or Post
Attach the shelter to the mounting surface in the desired location using
the lag screws and 1/4" flat washers as shown below.
Mounting Repeater on a Wall or Post
✦
Pipe - 3/4” to 1-1/4” (19 cm to 31 cm)
Use the 1-1/2" U-bolts and saddles, and the 1/4" washers and hex nuts
as shown below.
Mounting Repeater on a Small Pipe
2. Apply power (see step 3 on page 5) and close the shelter door.
Flat
Washer
Lag
Screw
Flat
Washer
Lock
Washer
Hex
Nut
U-Bolt