Installation manual

Mounting the Repeater Page 9
Mounting the Solar Power Model
1. Mount the shelter against a wall or post, or on a pipe.
CAUTION: Remember to face the solar panel south in the Northern Hemisphere (or north in the
Southern Hemisphere) for maximum sun exposure.
✦
Wall or Post
Attach the shelter to the mounting surface in the desired location using
the lag screws and 1/4" flat washers as shown below.
MOUNTING SOLAR-POWERED REPEATER ON A WALL OR POST
✦ Pipe - 3/4” to 1 1/4” (19 to 31 m)
Use the 1-1/2" U-Bolts and saddles, and the 1/4" washers and hex nuts
as shown below.
MOUNTING POWER KIT ON A SMALL PIPE
2. Apply power (see step 3 on page 6) and close the shelter door.
1/4" Lag Screws
and 5/16" Washers
1/4" Hex Nuts
and Washers
1-1/2" U-Bolts
and Saddles