Specifications

7
Temperature/Humidity Station. Please note that the Alarm Output data
logger makes no distinction between Vantage Pro and Vantage Pro2.
The temperature and humidity readings are numbered according to their
station transmitter ID. So, for example, if you have an ISS on Transmitter ID
# 1 and a Temperature/Humidity Station on ID # 4, and a Temperature
Station on ID # 2, you would check the following dialog boxes in the
example shown below. There is no need to indicate your ISS Temperature
and Humidity sensors because they always appear under “Outside
Temperature” and “Outside Humidity” in the parameter pick list.