Troubleshooting guide

4
The Select Components dialog box displays a selection of the components
that are preselected for installation with WeatherLink. The Components
List check box contains seven items, each with varying levels of importance:
• Application.exe (required) — The executable component of the Weather-
Link software. This must be installed with WeatherLink to ensure that the
software runs.
• Application Support Files (recommended) — The additional support
files needed to use real-time Windows menu items.
• Application Documentation (recommended) — The supporting docu-
ment resources such as the Online Help system and readme information.
• Sample Templates (optional) — The template files available to use/cus-
tomize your HTML pages. Use this component if you are planning to use
the Internet upload functions and would like to examine the available tem-
plates.
• App Config File (required) — The file used to configure settings in the
WeatherLink software. Leave this component checked.
• USB Drivers (required for 6510USB) —The component that installs the
USB drivers required to successfully connect the USB data logger to your
computer.
• Streaming Data Utility (required for 6540, 6544, 6550, 6560) —The
component that installs a program that configures the special parameters of
the Streaming modules.
6. Select or de-select the components list to customize your installation.
If installing the USB version of WeatherLink 6510USB), make sure the USB
Drivers component is selected before continuing. The Install USB Drivers
dialog box displays.
7. Click Ye s to verify USB Driver Installation. The Install Driver dialog box
displays.
8. Click Install. All the selected components and the USB drivers are installed.
The Installation Successful dialog box displays.
9. Click OK. WeatherLink has been installed successfully.
Note: If you have a previous version WeatherLink for USB, you may have to uninstall and rein-
stall the USB driver. See “Updating USB Drivers” on page 16 for more information.