Troubleshooting guide

Note: When necessary, the software automatically dials a phone modem station.

By selecting the Walkthrough process, the software displays a series of dialog

boxes. At each step in the Walkthrough process, confirmation boxes are pro-

vided to perform or skip the next step in the Walkthrough. To continue, select

OK. To skip this step and move to the next step, select Skip. To cancel the entire

walkthrough process, select Cancel.

Note: Please refer to the WeatherLink Help for more information about the Walkthrough.

Communication Port Settings

WeatherLink contains a dialog box for locating the communications port (either

USB or serial) that the data logger and console are connected to. Use the

Communications Port dialog box to select the communications port that is

used to communicate with the console.

1. Select Communications Port from the Setup menu or use the Walkthrough to

display the dialog box. The Communications Port dialog box displays.

2. Click Auto Detect. The program searches for the port that the console is

connected to. When the correct connection is found, the following dialog

box displays:

3. Click OK. The Communications Port dialog box displays with the correct

port selected.

4. Click OK to select the port and exit the dialog.