Troubleshooting guide

11
Note: The default value for the baud rate setting is 19200. If you have a Weather Envoy, this
value should remain the same in the WeatherLink software. The baud rate settings
screen displays only if the data logger has been installed.
The baud rate setting on the console must be same as that set in the WeatherLink
software. Use the up (+) and down arrows (-) to change the baud rate setting, if
needed. Press and hold DONE to return the console to the current weather mode.
• Use the fastest baud rate your modem can handle. 19200 is the fastest baud
rate available and is the default setting on the console.
• Press DONE when you’ve got the correct baud rate on the console screen.
Pressing DONE in this screen sends the initialization string to the modem, so
you don’t have to turn the console on and off again.
Remote Modem Connection Notes
When accessing a remote modem connection, WeatherLink automatically dials
the station and console whenever an action has been performed in the software
that requires it to talk to the station.
While connected to a remote station, an On-Line icon displays in the toolbar.
This icon indicates that WeatherLink has established a connection with the
remote console and weather station. Select the On-Line icon from the toolbar or
select Hang Up from the File menu to disconnect the phone connection.
Toolbar with On-Line Icon