Specifications

500AI

ANNUAL INSPECTIONS AND SERVICE

Your 500AI should be inspected annually by an Authorized AERIS Dealer who

will perform a factory prescribed function check and inspection for damage or

wear. To keep the 2 year limited warranty in effect, this inspection must be

completed one year after purchase (+/- 30 days). AERIS recommends that you

continue to have this inspection performed every year to ensure your 500AI is

working properly. A convenient service record is provided in the rear of this

owner's guide which should be signed by the service technician after each an-

nual inspection or factory service. The cost of annual inspections are not cov-

ered under the terms of the 2 year limited warranty.

WARNING: If you are in doubt about the accuracy of your

500AI's depth readings, DO NOT attempt to dive with it until it

has been inspected by AERIS Customer Service.

It is possible to damage the 500AI depth sensor if it is not pressure tested

properly. Please take heed of the following warning:

WARNING: Never pressure test the 500AI in an air environ-

ment. Doing so may damage the depth sensor; possibly result-

ing in erroneous depth or time readings.