Specifications

• the Time appears with the Hour setting (Fig. 28a) flashing

• press Select (Right) button until the correct Hour appears.

• press Advance (Left) button 1 time to accept the setting displayed

• the Minute setting (Fig. 28b) flashes

• press Select (Right) button until the correct Minute appears.

• press Advance (Left) button to accept the setting displayed, and either -

• revert to Surface Mode (if this setting was changed), or -

• advance to Set: Sampling Rate (Date/Time settings not changed)

SAMPLING RATE

Sampling Rate is the Time, or Depth, interval at which data samples will be

recorded during a dive for subsequent download to the Dive Downloader PC

software program. The set point has 'no effect' upon displayed data or data

stored in the unit's viewable Log.

Rates available are 2 FT (.5M), 5 FT (1.5 M), 10 FT (3 M), 2 SEC, 5 SEC, 10

SEC, 15 SEC, 20 SEC, 25 SEC, 30 SEC.

When lower rates (e.g., 2 FT, 2 SEC, etc.) are selected more samples are re-

corded per dive making the PC profile graphs smoother. However, since more

memory is used per dive, fewer dives can be stored for download. Also, lower

sampling rates require longer periods of time to download (up to 45 minutes).

Fig. 28 - Set Time of Day