Specifications

TO SET: UNITS OF MEASURE

• press BOTH buttons simultaneously, while in Surface Mode

• press Advance (Left) button 5 times

• the Units of Measure icons appear flashing (Fig. 24)

• press Select (Right) button to toggle between 'FT, °F' and 'M, °C'

• press Advance (Left) button to accept the setting displayed, and either -

• revert to Surface Mode (if this setting was changed), or -

• advance to EA Mode (this setting was not changed)

EA MODE

Although included in the menu structure, External Access (EA) Mode has no

settings. It is accessed only when data is being downloaded (copied) to the

Dive Downloader PC software program for storage and viewing.

EA Mode is described on page 53 in the Post Dive Mode section.

• press Advance (Left) button to 'bypass EA Mode' (Fig. 25) and revert to

Surface Mode

Fig. 25 - EA Mode

Fig. 24 - Set Units

PSI