Specifications

TO SET: DEPTH ALARM SET POINT

The Depth Alarm can be set to values between 30 feet (10 meters) and 320 feet

(97.5 meters) in 10 foot (3/3.5 meter) increments.

• press BOTH buttons simultaneously, while in Surface Mode

• press Advance (Left) button 2 times

• Max Depth and Audible Alarm icons appear with the Max Depth value

flashing (Fig. 21)

• press Select (Right) button until the desired Depth Alarm value appears

• press Advance (Left) button to accept the setting displayed, and either -

• revert to Surface Mode (if this setting was changed), or -

• advance to Set: Turn Pressure Alarm (this setting was not changed)

Example of Tank Pressure Alarm Set Points (described on next page):

Starting with 3000 PSI (206.5 BAR) in your tank, set the Turn Pressure Alarm

for 2000 PSI (137.5 BAR) and the End Pressure Alarm for 1000 PSI (68.5

BAR). This allows for 1000 PSI (68.5 BAR) going out, 1000 PSI (68.5 BAR)

used coming back, and 1000 PSI (68.5 BAR) reserve.

The Turn Pressure Alarm can be disabled by setting the value at '00'.

Fig. 21 - Set Depth Alarm

MAX