Specifications

Call toll-free 1 800 678 3669 17
INSTALLATION DIAGRAMS | EXTENSION CABLES
EXTENSION CABLES
Increase the length of cables for the Davis products below by adding
extension cables. Our Standard 4-Conductor Extension Cables include a
coupler kit (protective shell; cable coupler; and 5 waterproof, silicone-filled,
crimp-style splice connectors) for joining two cables together, indoors or
out. Use the chart below to determine maximum cable lengths.
7876-008 8' (2.4 m) $10
7876-040 40' (12 m) $18
7876-100 100' (30 m) $40
7876-200 200' (61 m) $70
Product Cable Use
Included Cable
Length
Maximum Cable
Length
Wireless Vantage Pro2 Anemometer to Integrated Sensor Suite 40' (12 m) 240' (73 m)*
Cabled Vantage Pro2
Anemometer to Integrated Sensor Suite 40' (12 m) 240' (73 m)*
Console to Integrated Sensor Suite
100' (30 m) 1000' (300 m)
WeatherLink for Vantage Pro2 and
Vantage Vue (serial port versions)**
Data logger to serial port 8' (2.5 m) 48' (14.6 m)
Solar Radiation Sensor (6450) Sensor to Integrated Sensor Suite 2' (0.6 m) 125' (38 m)
UV Sensor (6490) Sensor to Integrated Sensor Suite 2' (0.6 m) 125' (38 m)
Stainless Steel Temperature Probe with
RJ Connector (6475)
Probe to Wireless Temperature
Station, Weather Envoy, Envoy8X, or
Anemometer/Sensor Transmitter Kit
25' (7.6 m) 200' (61 m)
Temperature Probe with RJ Connector
(6477)
Leaf Wetness Sensor (6420)
Sensor to Wireless Leaf & Soil
Moisture/Temperature Station
40' (12 m) 200' (61 m)
Anemometer (6410)
Sensor to Integrated Sensor Suite or
Anemometer/Sensor Transmitter Kit
40' (12 m) 240' (73 m)*
Rain Collector (standalone, 7852)
Collector to Integrated Sensor Suite or
Anemometer/Sensor Transmitter Kit
40' (12 m) 900' (270 m)
* Anemometer Cables: Maximum displayable wind speed decreases as the length of cable increases. At 140' (42 m) of cable, the
maximum wind speed displayed is 135 mph (60 m/s). At 240' (73 m) of cable, the maximum wind speed displayed is 100 mph (45m/s).
** WeatherLink USB: Extension cables may be purchased from a computer supplier.
To extend the cables on Temperature Probe (6470), Soil Moisture Sensor (6440), and Rain Collector Heater (7720), see instruction manuals.
Each Vantage Pro2,
Weather Envoy,
Envoy8X and Vantage
Connect console/
receiver can receive
data from up to eight
different transmitting
stations.
Temperature/Humidity Station
Console/receivers
Soil Moisture/
Temperature
Station
Leaf & Soil Moisture/
Temperature Station
Anemometer/Sensor
Transmitter Kit
ISS
WIRELESS VANTAGE PRO2
ISS
Console/Receiver
ANEMOMETER/SENSOR TRANSMITTER KIT
ISS
Console/Receiver
AnemometerAnemometer/Sensor
Transmitter Kit
REMOTE ANEMOMETER
ISS
Console
Anemometer
AC Power
Adapter
FIELD STATION SHOWING SOLAR POWER KIT &
SOIL MOISTURE SENSORS
Integrated sensor suite
Wireless
console/receiver
in complete
system shelter
Solar power kit
Temperature
probes
Soil
moisture
sensors
Leaf & Soil
Moisture/
Temperature
Station
MAXIMUM NUMBER OF EACH STATION TYPE (TOTAL # OF STATIONS CANNOT EXCEED 8)
Transmitting Station
Shown on Console
Logged by
WeatherLink
Vantage Pro2 Vantage Vue
Integrated Sensor Suite 1 1 1
Anemometer/Sensor Transmitter Kit 1 0 1
Leaf & Soil Moisture/Temperature Station 2* 0 2*
Temperature Station 8 0 3**
Temperature/Humidity Station 8 0 2**
* One fully-populated station or two partially-populated stations.
** WeatherLink will log a maximum of A) 3 Temperature Stations or B) 2 Temperature Stations and 1
Temperature/Humidity Station or C) 1 Temperature Station and 2 Temperature/Humidity Stations.