User guide

DriveRight FMS User's manual
How to Upgrade Firmware
Back to FMS Quick Reference Menu
| Wireless Menu
Home
| Getting Started | Quick Reference | Menu Commands | Troubleshooting
How to Add a Base Station
The Add New Base Station dialog box configures the Base Station to wirelessly communicate
with Wireless On-Board Modules and allows you to assign a position to it that makes it easily
identifiable throughout FMS.
To add a new Base Station:
1. Connect your Base Station to the computer's USB port.
2. Select Add New Base Station from the Wireless Menu. If this is the first time a Base
Station or Wireless On-Board Module has been added to FMS, the Select Operating
Region dialog box displays.
3. Select among the three choices displayed: North America, Europe, or Other. The
operating region determines the power level of the wireless devices. Select Europe if the
power levels of the wireless devices must not exceed CE certification requirements of
less than 10 dBm. Select North America if the power levels of the wireless devices must
not exceed FCC or IC certification requirements of less than 30 dBm. Select Other if the
operating region is not North America or Europe.
4. Click OK to save the operating region information or click Cancel to exit without saving.
The Add New Base Station dialog box displays.
72