User guide

DriveRight FMS User's manual

To setu

p GPS logging:

1. Select DriveRight Settings from the DriveRight Menu.

2. Select Setup GPS from the DriveRight Settings drop down list. The Setup GPS

Logging Interval dialog box is displayed.

3. Set GPS Logging to On, Off, or DriveRight Speed Only.

o Select On to enable GPS logging.

o Select Off to disable GPS logging.

o Select DriveRight Speed Only to log the DriveRight speed without the GPS

coordinates. No GPS unit is required to enable this option.

4. Enter the desired logging interval and indicate a time unit of either seconds (Sec) or

minutes (Min). Logging Hours indicates how much data can be stored at the selected interval.

5. Click Set to save the changes or click Cancel to exit without changing the settings

Back to DriveRight Menu

| DriveRight Settings

Home

| Getting Started | Quick Reference | Menu Commands | Troubleshooting

Downloading Requirements

You cannot download a DriveRight if any of the following conditions exist:

 DriveRight not present in the database.

 DriveRight not assigned to a Vehicle.

Note: The same conditions also apply to Host Mode and Palm Download.

Back to Quick Reference Menu

Home

| Getting Started | Quick Reference | Menu Commands | Troubleshooting