User guide

DriveRight FMS User's manual

See also:

Add New DriveRight

Back to Quick Reference Menu

Home

| Getting Started | Quick Reference | Menu Commands | Troubleshooting

DriveRight Settings

The following commands allow you to view and or change the settings on a DriveRight device:

View/Set

Restore

Setup GPS

Verify DriveRight Calibration

Back to DriveRight Menu

Home

| Getting Started | Quick Reference | Menu Commands | Troubleshooting

DriveRight Settings: Verify DriveRight Calibration

The Calibrate DriveRight dialog box allows you to verify DriveRight calibration settings.

 The Calibration Setting dialog box shows two installation methods. VSS (vehicle speed

sensor) installation and Reed Switch.

To verify the DriveRight console calibration:

1. Click on DriveRight Settings from the DriveRight Menu.

2. Select Verify DriveRight Calibration from the drop-down menu. A DriveRight

Calibration Message dialog box is displayed.

3. Click OK, Set or Cancel to continue, depending on the displayed message. The

Calibrate DriveRight dialog box is displayed.