User guide

DriveRight FMS Help

Calibration Settings - SmartCard

Use this command to modify and edit the calibration settings for a specified DriveRight device.

The calibration settings control how the DriveRight device is calibrated and monitoring the

selected vehicle.

To select the calibration settings:

1. Select Transfer to DriveRight from the SmartCard Menu.

2. Select Settings from the Transfer to DriveRight submenu. The Review Settings for

SmartCard dialog box is displayed.

3. Select the Calibration Settings tab near the top of the dialog box. The calibration settings

options are displayed.

4. Describe the installation method or the type of connections/hookups used to connect the

device to the vehicle in the Installation Method group box.

5. Click Set to save the calibration settings, click Cancel to exit without saving the settings,

or click on another tab to make additional changes to the DriveRight default settings.