User guide

DriveRight FMS User's manual

Use this com

mand to identify the DriveRight device receiving the new settings from the

SmartCard. The Identifcation settings control which DriveRight device gets the modifications

assigned in the Review Settings for SmartCard dialog box.

To select the identification settings:

1. Select Transfer to DriveRight from the SmartCard Menu.

2. Select Settings from the Transfer to DriveRight submenu. The Review Settings for

SmartCard dialog box is displayed. The Identification Tab is the default tab that is

displayed upon opening the dialog box.

3. Select the DriveRight device, ID, vehicle ID and default driver the device will be

programmed to recieve.

4. Click Set to save the Identification Settings, click Cancel to exit without saving the

settings, or click on another tab to make additional changes to the DriveRight default settings.