User guide

DriveRight FMS Help
3. Select a tab to view or edit the following default settings:
 Identification Settings
: Select the DriveRight ID and Driver associated with the
card.
 Calibration Settings
: Select calibration settings that the DriveRight device should
use.
 Unit Settings
: Select the date, time and unit modes and click OK.
 Safety Settings
: Enter the speed, acceleration and deceleration limits and click
OK.
 Timer Settings
:Enter the trip stop time and driver log out time and click OK.
 Alarm Settings
: Select the alarm mode. Warn if not logged in is an option.
 Security Settings
: Enter the security code (PIN code). Tamper indicator is an
option.
 GPS Settings
: Turn the GPS logging and subsequent mapping feature on and off
and select mapping features. Works only with DriveRight 600 and 600
E units with
GPS modules.
4. When your are finished, click OK to save any changes or click Cancel to exit without
saving changes.
Back to Transfer to DriveRight
| SmartCard Menu
Home
| Getting Started | Quick Reference | Menu Commands | Troubleshooting
Identification Settings - SmartCard
165