User guide

DriveRight FMS Help
Driv
eRight Software Host Mode Setup
Inititialization String 1: AT E1 Q0 &B1 &N0 V1
Inititialization String 2: ATS0=3
See also:
Host Mode On
Host Mode Setup
Back to Setup Menu
| Host Mode Menu
Home
| Getting Started | Quick Reference | Menu Commands | Troubleshooting
Communications Port - CarChip Settings
Use the Communications Port - CarChip Settings command to select the communications port
used to connect a CarChip device to your computer.
To select a Communications port:
1. Choose the Communications Port - CarChip from the Setup Menu. The
Communications Port Settings dialog box is displayed:
2. Select USB if using a USB connection or the correct COM port for the serial port
connection from the list provided. DriveRight FMS supports USB and COM1 through COM8.
3. If you are not sure which communications port you are using, connect your CarChip to
your computer, click the Auto Detect button. If the CarChip is found by the software, the following
message is displayed and the correct communications port is selected in the dialog box.
115