Getting Started Guide (8180, 8185) Manual

Page 8
7. Set Download Options
Select File|Preferences|Download Options...
The dialog box tha appears contains the following options:
❏ Synchronize time and date after every down-
load
This option resets the DriveRight to the system
time and date after each download. If you
select this option, check the system time and
date regularly to ensure accuracy.
❏ Log accident data after every download
Include accident log data in the records (only
available on DriveRight models with accident
logging facilities).
❏ Use DriveRight ID Code as Location ID or
Driver ID (Trip 500AL only)
With the DriveRight Trip 500AL you may spec-
ify a Driver ID using the code on the Drive-
Right.
If only one driver uses a vehicle, the code may
be used as a Location ID. To specify a Location
ID for each address, select Setup|Trips|
Addresses... (explained below). Then, at the
beginning of a trip, specify the Location ID in
the DriveRight console. When downloading
the DriveRight, VMS interprets each ID as the
destination of each trip.
8. Set Automation Options
Select File|Preferences|Automation Options...
❏ Automatically use last trip destination as next
trip origin
Automatically assign the destination address of
a given trip as the originating address of the
next trip.