Installation manual

9
Install the Fan Unit
1. Place the fan unit into the center of the fan plate. See Figure 14.
2. Cabled ISS Only: Because the SIM in a cabled ISS receives power from the
console, we recommend you cut the power cable next to the connector module and
discard the cable. Save the connector module for use in Steps 3 and 4. See Figure
14.
3. Plug the fan cable into the 3-pin connector on the connector module.
4. Plug the solar panel cable into the 2-pin connector on the connector module.
Fan Unit
Solar Panel &
Mounting Bracket
3-Pin
Connector
2-Pin
Connector
Power Cable
Assembly
Put Power Cable
Clamp Here
Fan Cable
Solar
Power
Cable
Important - Cabled ISS Only!!
Cut Connector Module off the Power Cable
Assembly before connecting fan or solar panel.
Keep the Connector Module
Discard the rest of the cable
Cut Here
Figure 14. Install Fan Unit