Owner manual

Page 4 ConsoleLink™
Note: The WeatherLink will not fit in the base of the host station and must be positioned outside of
the console base as shown on page 3. Avoid putting undue pressure on the short cable plugged
into the ConsoleLink.
A
TTACHING THE
C
ONSOLE
L
INK TO A
W
IRELESS
W
EATHER
S
TATION
You can attach a ConsoleLink to a wireless weather station as follows:
1. Remove power from the weather station.
2. Nest the ConsoleLink into the console base as shown in diagram A.
A
TTACHING THE
C
ONSOLE
L
INK TO A
W
IRELESS
W
EATHER
S
TATION
3. Insert the SensorLink connector into the weather station “Junction Box” jack.
4. Reinstall the console base following the instructions in your host station manual.
The SensorLink remains outside the console base.
5. Insert the WeatherLink connector into the ConsoleLink jack as shown in diagram B.
Both the WeatherLink and SensorLink remain outside the console base.
6. Adjust the SensorLink and ConsoleLink antennas to a vertical position outside the
console base.
7. Apply power once you make all the connections.
ConsoleLink
SensorLink
Receiver
Mounting Base
Weather Station
Console
To
Power
Adapter
To
Power
Adapter
ConsoleLink
(inside Mounting Base)
SensorLink
Receiver
WeatherLink
WeatherLink
Connection
to Computer
A
B