User's Manual

Mounting the Repeater Page 9
Mounting the Solar-powered Repeater
1. Mount the shelter against a wall or post, or on a pipe.
CAUTION: Remember to face the solar panel south in the Northern Hemisphere and north in the
Southern Hemisphere for maximum sun exposure.
✦ Wall or Post
Attach the shelter to the mounting surface in the desired location using
the lag screws and 1/4" flat washers as shown below.
MOUNTING SOLAR-POWERED REPEATER ON A WALL OR POST
✦ Pipe - 3/4” to 1 1/4” (19 cm to 31 cm)
Use the 1-1/2" U-Bolts and saddles, and the 1/4" washers and hex nuts
as shown below.
MOUNTING POWER KIT ON A SMALL PIPE
2. Apply power (see step 3 on page 6) and close the shelter door.