User's Manual

1
Welcome to Your EnviroMonitor System
An EnviroMonitor System
includes a Gateway and a number
of Nodes, each with up to four
sensors that form an advanced
mesh network operating at 902 -
928 MHz (868 MHz in the EU).
The Nodes transmit the sensor
data to a “mesh parent,” either the
Gateway or another Node. The
Gateway then sends the data via
cellular connection to
WeatherLink.com.
EnviroMonitor can be customized
for different sized installations.
Each Gateway can receive 20 or
more Nodes. Additional Gateways
can be added to your account to
receive data from another set of
Nodes.
A Davis cabled GroWeather
Sensor Suite can also be plugged
into the Gateway.
This manual will show you how to
set up both the EnviroMonitor
Gateway and Nodes. If you are
just installing a Node and have
already installed the Gateway, you
can skip to page 12:
Set Up Nodes
and Sensors
.
The steps for setting up your EnviroMonitor system:
1. Plan: What sensors do you need and where? Decide where you will install the
Gateway and Nodes. See page 2:
Planning Your System.
2. Power up your Gateway. See page 7:
Power-up and Connect your Gateway.
3. Connect your Gateway to WeatherLink.com with the EnviroMonitor app.
4. Mount the Gateway. See page 9:
Mount the Gateway.
5. Power up the Node. See page 13:
Power-up and Connect the Node.
6. Connect the Node to the Gateway with the EnviroMonitor app.
7. Mount the Node. See page 16:
Mount the Node.
8. Add and Install the sensors with the EnviroMonitor app.
™
0-4 Sensors
per Node
1 Gateway
WeatherLink.com
Cabled
GroWeather ISS
(optional)
20+
Nodes
per
Gateway