User's Manual
Table Of Contents
- Siting the Gateway
- Siting the Nodes
- Prepare for Installation
- Installing the Gateway
12
Mounting On a Pole
Mount the Gateway onto a pole with an outside diameter of 0.84'' to 1.84'' (21 mm
to 27 mm) using the U-bolts, backing plates, washers, and hex nuts provided.
Note: For mounting on larger diameter pipes, the housing can accommodate U-bolts with
5/6'' (8 mm) threads for pipes up to 2.40'' (61 mm) outside diameter (not provided).
Set Up Nodes and Sensors
See your Enviromonitor Node User Manual.