User Manual

Page 4 Wireless Soil Moisture/ Temperature Station

The factory default transmitter ID is ‘1’. Looking at the table below, you can

see that means the DIP switches are in the OFF position when each

transmitting station leaves the factory. This is true for all of Davis’ wireless

equipment.

The default setting on a Wireless Vantage Pro console is “ON (ISS).” The ISS

is included with every Wireless Vantage Pro, so the console/receiver is set to

ﬁnd the ISS on DavisTalk channel 1.

Verify the DavisTalk channel used by your ISS, as well as any other

DavisTalk channels already in use by your Vantage Pro Weather Station

Conﬁgure the Soil Moisture Station to a DavisTalk channel not already in

use.

Use a ballpoint pen or paper clip to toggle DIP switches #1, 2, and 3. The

settings for transmitter IDs 1 – 8 are shown in the table below:

Use this table to ensure that each wireless transmitting station in your

system is broadcasting on its own transmitter ID.

DIP Switches in Top-right Corner of SIM (Illustration has been enlarged for clarity)

ID C

ODE

WITCH

(default)

off off off

#2 off off ON

#3 off ON off

#4 off ON ON

#5 ON off off

#6 ON off ON

#7 ON ON off

#8 ON ON ON

1234

Battery Holder

DIP Switches