User's Manual

Displaying Weather Variables
19
information on changing the unit measure or displaying the temperature in
tenths of a degree. If the unit of measure is changed for Inside or Outside
Temperature, the unit of measure also changes for all temperature related
weather variables, such as Wind Chill, Dew Point and Heat Index.
Note: The unit of measure also affects the Cooling Degree Day and Heating Degree Day Bases
and the value entered in both screens is automatically converted to the unit of measure
selected. Check the values for both of these bases in the Setup Mode to make sure the
value is still accurate for the new unit of measure. See “Screens 15 and 16: Cooling and
Heating Degree Day Base” on page 13 for more information.
2. Press WxCEN to display weather information available for the outside
temperature variable in the Weather Center.
3. Press WxCEN multiple times to scroll through all the outside-temperature-
related Weather Center screens, which include:
• Maximum Temperature — Displays the highest temperature for the day
with the time the temperature was recorded.
• Minimum Temperature — Displays the lowest temperature for the day
with the time the temperature was recorded.
• Temperature Change Per 24 hours — Displays the difference between the
temperature currently recorded and the temperature recorded at the
same time the day before.
• Temperature Change Per hour — Displays the difference between the
temperature currently recorded and the temperature recorded the hour
before. This number is updated every 15 minutes.
• Maximum Outside Temperature today and over the last 25 days — Dis-
plays the highest temperature today and over the last 25 days and the
date the temperature was recorded.
• Minimum Outside Temperature today and over last 25 days — Displays
the lowest temperature today and over the last 25 days and the date the
temperature was recorded.
• Number of Cooling Degree Days — Displays the number of cooling
degree days logged on the console since it was first powered up or the
value was reset. (Displays only if a threshold has been set.)
• Number of Heating Degree Days — Displays the number of heating
degree days logged on the console since it was first powered up or the
value was reset. (Displays only if a threshold has been set.)
4. Press TEMP again to select the inside temperature.
5. Press WxCEN to display the weather information available for the inside
temperatures in the Weather Center.
6. Continue pressing WxCEN to scroll through all the inside-temperature-
related Weather Center screens, which include:
• Maximum Temperature — Displays the highest inside temperature for
the day with the time the temperature was recorded.
• Minimum Temperature — Displays the lowest inside temperature for the
day with the time the temperature was recorded.