User's Manual

36
2. Remove the rain collector
cone.
3. Using a Phillips-head
screwdriver, remove the
three screws connecting the
rain collector base to the
threaded spacers.
4. While removing the screws,
support the radiation shield
from the bottom. When the
screws are removed, it will
drop.
5. Take note of the cable
placement and routing so
you can replace it correctly.
6. Unscrew the three
threaded spacers
holding the solar
bracket and
radiation shield
together and lift
off the solar
bracket.
7. Remove the two
cap plates.
Rain Collector Base
Threaded
Spacer
Bracket
Flat Washer
1-1/4" Screw
Lock Washer
Plates
Screen
Threaded
Spacer
Lock Washer
Flat Washer
Stand-offs
Fan Plate
Temp/Humidity
Cable
Solar Panel
Cable
(Plugged into
Junction Board)
Closed Cap Plate
Open Cap Plate
(hole in center)
Solar Panel
Bracket
Junction Board