User's Manual

To change to another ID, use a ballpoint pen or paper clip to toggle DIP switches

#1, 2, and 3. The settings for Transmitter IDs 1 - 8 are shown in the table below.

Set the Vantage Pro2 console to the same ID as the transmitters, as described in

the Vantage Pro2 Console User Manual.

Using Multiple Transmitting Stations

A single Vantage Pro2 console can receive signals from a total of up to eight

transmitters with limitations as shown in the table below.

If you are using a WeatherLink Live, you may have up to eight different transmitters,

in any combination, including eight sensor suites.

*Replaces the sensor suite anemometer.

**Two are allowable only if one stations has only leaf wetness and one has only soil moisture sensors.

For example, a network can either have both a Leaf Wetness/Temperature station and a Soil Moisture/

Temperature station, or it can have one combined Leaf Wetness and Soil Moisture/Temperature station.

ID CODE SWITCH 1SWITCH 2SWITCH 3

#1 (default) off off off

#2 off off ON

#3 off ON off

#4 off ON ON

#5 ON off off

#6 ON off ON

#7 ON ON off

#8 ON ON ON

Maximum Number of Transmitters

Console WeatherLink Live

Vantage Pro2 or Vantage Vue Sensor Suite 18

Sensor Transmitter with an Anemometer 1* 8

Leaf & Soil Moisture/Temperature Station 2** 8

Sensor Transmitter with a Temperature Probe 88

Sensor Transmitter with a Temp/Hum Sensor 88

Sensor Transmitter with any other combination of

sensors

-- 8