User's Manual

Chapter 3
Page 32 Vantage Pro Console Manual
Note: To display ET readings, you must install the optional Solar Radiation sensor.
Selecting Units
Most weather variables may be displayed in at least two different units, typi-
cally the English and Metric systems, although some variables feature more
possibilities. Barometric pressure, for example, may be displayed in millibars,
millimeters, inches, or hectoPascals.
You may change the units display at any time.
To change the units for any variable:
1. Activate the variable using the keypress sequences described above. (See “Activating
Weather Variables” on page 26.)
2. Press and release the 2nd key.
3. Press the Graph / Units key.
The selected variable’s units will change. Repeat steps 2 and 3 until the
desired units appear.
For example, to select Barometric pressure units, activate the Barometric
presure by pushing BAR. Next, press and release the 2nd key, then press the
Graph / Units key. The units field will display millibars, millimeters, inches, or
hectoPascals. Repeating these steps cycles through all four selections. Stop
when the the desired unit appears.
Current
ET, ET Month, ET Year, & Solar Radiation
Barometric Pressure: millibars (mb), millimeters (mm) and inches (in)