User's Manual

Current Weather Mode
Vantage Pro Console Manual Page 31
• Rain “Storm”
Rain “Storm” displays the rain total for the last rain event occurring at least 24
hours from any previous rain event. Repeat the above sequence: press and
release the 2ND key, then press the RAINYR / RAINDAY key.
All rain accumulation may be displayed as either millimeters (mm) or inches
(in). See “Rainfall” on page 50.
Solar Radiation
• Current Solar Radiation
Press and release the 2ND key, then press the UV /
SUN key to display the current solar radiation
reading.
Solar radiation is displayed as Watts per square
meter (W/m
2
). See “Solar Radiation” on page 51.
Note: To display solar radiation readings, you must have installed the optional Solar Radiation sensor. (See
“Optional Sensors” on page 9)
ET (Evapotranspiration)
• Current ET
Press and release the 2ND key, then press the BAR /
ET key to display the current evapotranspiration
reading. See “EvapoTranspiration (ET)” on page 54.
• Monthly ET
Repeat the sequence (i.e. Press and release the 2ND key, then press the BAR /
ET key) to display Monthly ET.
• Yearly ET
Repeat the sequence a third time to display the ET reading since January 1st of
the current year.
Daily Rain, Rain Storm, Rain Year, Rain Month, & Rain Rate