User manual

9
Installing a Weather Wizard III Console and Small Junction
Box
YoumayinstallaWeatherWizardIIIconsoleandsmalljunctionboxinthe
CSS,asshownbelow,withthenyloninsulatorsand#4x1/2”(12.5mm)self‐
tappingscrewssuppliedwiththehardwarekit.Youmayinstallthesmalljunc‐
tionbo
xintotheCSS,usingdouble‐stickpads,double‐sidedtape,orthescrews
shownbelow.Ifusingthescrews,youwillhavetodrillaholeinoneofthe
locationsshownbelowusingtheindicateddrillbit.Useapenciloracenter‐
punchtomarkthelocationofth
eholebeforedrilling.
(Optional)
Installing a Weather Wizard III Console and Small Junction Box