User manual

6
Mounting the CSS
Theinstructionsbelowtakeyouthroughtheprocedurenecessarytomountthe
shelteragainstawallorpost,onasmallpipe,oronalargepipe.
Mounting the Shelter on a Wall or Post
Attachthesheltertothemountingsurfaceinthedesiredlocationusingthe
largescrewsand1/4”flatwashersasshownbelow. Useapenciloracenter‐
punchtomarkthelocationofthepilotholes.
Mounting on a Wall or Post
Mounting On a Pipe
MounttheCSSontoapipe,outsidediameterbetween11/2”and23/8”(38mm
and60mm),usingthe21/4”U‐bolt,saddles,5/16”washers,and5/16”hexnuts
asshownbelow.Forasmallerpipe,outsidediameterbetween3/4”and11/4”
(19mmand31mm),us
e11/2”U‐Bolts(notprovided).
Mounting on a Pipe