User manual

10
Installing Surge Protectors
Toinstall2‐or4‐wireSurgeProtectorsintheCSS,youwillneedtoobtaina
groundterminal(availablefreefromDavis).Thegroundterminalincludesall
hardwarenecessarytoinstallthesurgeprotectorasshownbelow.Connectthe
groundjumpertothesurgeprotectorsandthegroundlug.Consultthesu
rge
protectormanualforinstructionsonwiringthesurgeprotectors
.
Installing Surge Protector
Securing Cables
Securecabletotheinsideoftheshelterusingself‐adhesivecabletiemounts
andcableties.Whenfinishedinstallingcomponents,tightenthecompression
nutsonthestrainreliefstosecurethecablesandcreateaweather‐resistantseal.
Ifthereisalargeairspacearoundthecables,fillthespacebywrappingthe
cabl
esinelectricaltapeand/orsealingwithsiliconecaulking.