User manual

Installation Steps

For ease of installation, please follow steps in the order presented.

• Prepare the temperature station, page 3

• Insert the battery, page 3

• Set the transmitter ID, page 3

• Set ID on the temperature station using DIP switches, page 4

• Set the console to recognize the signals, page 4

• View current temperature, page 5

• (If you don’t see temperature from the correct Station No., put the

transmitter in TEST mode, page 5)

• Choose a location for the wireless temperature station, page 6

• Test transmission from the proposed mounting location, page 7

• Mount the temperature station, page 8

• A note on securing cables, page 10

• Specifications, page 11

For Technical Support, please see “Contacting Davis Instruments” on page 10.