Owner's Manual

6g) With the hammers placed at a rest position (down), pour down the righthand barrel the pre-
weighed powder charge. (see loading tables in this booklet). ALWAYS MAKE SURE OF THE
BARREL YOU START WITH. ( picture #41 )
picture #41
Slap the side of the barrel in front of the lock, this will allow a small quantity of powder to go into
the nipple. ( picture #42 )
picture #42
7g) Center a lubricated cloth patch over the muzzle and place the round ball over it (see points
6a, 7a of section “LOADING AND SHOOTING INSTRUCTIONS FOR SINGLE SHOT MUZZLE LOADING GUNS”
of this booklet)( picture #43 ). To facilitate this operation we suggest the use of a bullet
starter (art. USA 510), that will help the introducing of the ball for the first 15 cm (6”) ( picture
#44 ), then you can continue with the ramrod.
Picture #43 picture #44
28