Owner's Manual

6f) With the hammers placed at a rest position (down) pour down the righthand barrel the pre-
weighed powder charge (see loading tables in this booklet). ( Picture #32 )
ALWAYS MAKE SURE OF THE BARREL YOU START WITH.
Picture #32
Slap the side of the barrel in front of the lock, this will allow a small quantity of powder to go
into the nipple. ( picture #33 )
picture #33
7f) Place on the muzzle an over powder cork wad (item USA 093) and a wad (item USA 087)
and with the ramrod, carefully press it to a firm seat on top of the powder load.
Some shooters use instead of the wad a felt wad (item USA 094) and an additional over
powder cork (item USA 093).
It is advisable to mark your ramrod at the muzzle in order to have a reference (see point 17
of section “IMPORTANT CAUTIONS FOR MUZZLE LOADING SHOOTING” in this booklet).
( Pictures #34 and #35 )
picture #34 picture #35
23