Owner's Manual

LOADING AND SHOOTING INSTRUCTIONS
FOR SIDE BY SIDE MUZZLE LOADING SMOOTH BORE SHOTGUNS
Before proceeding, please make sure to CAREFULLY read the warning seen in the section
“IMPORTANT CAUTIONS FOR MUZZLE LOADING SHOOTING” in this booklet.
WARNING : BEFORE PROCEEDING ALWAYS MAKE SURE THE FIREARM IS UNLOADED AND
POINTED IN A SAFE DIRECTION.
ASSEMBLING
1f) Do not force barrel into stock.
2f) Hook the barrel breech plug into the tang make sure the barrel fits properly to the tang.
Gently lower the barrel into the barrel channel in the stock. DO NOT FORCE the barrel.
3f) The barrel must fit into the stock perfectly, with a minimal amount of tension in order to hold
the wedges in.
4f) Gently insert the wedges RIGHT TO LEFT.
( picture #30 )
picture #30
LOADING
5f) With the gun pointing in a safe direction place caps on the nipples, set the hammers in full
position and fire. This operation should be repeated two or three times in order to dry out the
base of bores and the nipples. Now you can start loading. ( picture #31 )
picture #31
22