Owner's Manual

CLEANING INSTRUCTIONS
FOR SINGLE SHOT MUZZLE LOADING GUNS
WARNING : BEFORE PROCEEDING ALWAYS MAKE SURE THE FIREARM IS UNLOADED AND
POINTED IN A SAFE DIRECTION.
HOW TO REMOVE THE BARREL FROM STOCK
Our line of muzzleloader is devided in two groups of weapons: the first ones which barrel ends
with a breech plug into the stock. The second ones with a hook breech tang and plug.
1c) For the guns of the first group to remove the barrel from the stock, once removed the
ramrod, you have to unscrew the tang screw and then take the pins and/or the wedge off.
( pictures #26 and #27 )
picture #26 picture #27
2c) For the guns of the seconds group, the barrel is fixed to the stock with wedges. Once
removed the ramrod, retract the wedge or wedges, handle the barrel at the muzzle and
rotate towards the height, the lug will disengage from its seat. ( pictures #28 and #29 )
picture #28 picture #29
20