Owner's Manual

FLINTLOCK FIREARMS

1B) Percussion muzzleloader loading instructions also apply to flintlock but no percussion caps

are needed to fire. (See points 1a, 2a, 4a, 5a, 6a, 7a).

2B) Insert the flint in the hammer between two pieces of thin lead and tighten the hammer screw

to hold the flint firmly in place. ( pictures #18 and #19 )

picture #18 picture #19

3B) Point the gun in a safe direction, prime the pan with a small amount of fine black powder

using a “pan primer” (item USA 085) ( picture #20 ), and pull the frizzen down to cover

powder in flash pan ( picture #21 ). NOW THE GUN IS LOADED.

Picture #20 picture #21

4B) Set the hammer in full cock position ( picture #22 ). NOW THE GUN IS READY TO FIRE.

Picture #22