Owner's Manual

If after some attempts the gun still should not fire, UNLOAD IT using the proper caliber bullet

puller (item USA 545). MAKE SURE YOU HAVE REMOVED ANY CAP ON THE NIPPLE AND THE

HAMMER IS IN A SAFETY POSITION.

Using a small eye dropper or medicine dropper filled with water, forceably inject the water

into the breech plug. Water will cause the black powder to become inactive. ( picture #16 )

picture #16

After you have done this 3-5 times, wait at least 30 minutes for the black powder, to become

completely saturated with water.

Further screw the bullet puller to the ramrod, insert it into the barrel to catch the bullet;

rotating the ramrod will ease the bullet pulling. ( picture #17 ) You can now remove the

powder.

Picture #17