Owner's Manual

8a) With the gun pointed to a safe direction and the hammer set at half cock position, place a
percussion cap on the nipple. NOW THE GUN IS LOADED. ( picture #13 )
picture #13
9a) Place the hammer on the full cock position; THE GUN IS NOW READY TO FIRE. ( PICTURE #14)
PICTURE #14
10a) After firing slide the ramrod into the empty bore and wait for one full minute before
loading the next powder charge; this will allow any remaining sparks in the barrel to burn
out.
11a) In case of a misfire make sure you keep the gun pointed in a safe direction and just wait for
at least one minute before re priming. There is always the chance a spark is smoldering in
the powder and the gun could fire at any moment. If still a misfire using new cap, place a
small charge of fresh black powder in the nipple using a nipple charger (art. USA 080), place
the cap and fire. ( picture #15 )
picture #15
16