Owner's Manual

DOUBLE SET TRIGGER SINGLE SET TRIGGER
CALLED FRENCH STYLE
SIGHTING ADJUSTMENT
Your gun can be equipped with a non-adjustable rear sight, or with an adjustable rear sight. In the
first case, sighting adjustments should be made with the front sight, which is drift adjustable for
windage. With a brass drift, the front sight can be moved left or right, depending on which direction
your rifle happens to be shooting. Move the front sight in the direction you are shooting: if you are
shooting to the left, move your front sight left; if it shoots right, move the front sight right. For short
range elevation adjustments, it may be necessary to file the front sight blade down a little.
For the models provided with adjustable rear sight, its regulation can be done in combination with
the front sight.
The elevation adjustment will be obtained moving the sliding aiming notch to the opposite shooting
position. If the gun shoots low, you have to adjust the sliding aiming notch towards the high and
vice-versa.
The windage adjustment will be on the opposite side where the mistake is.
10