General Hints

26
LOADING AND SHOOTING INSTRUCTIONS
FOR DERRINGER RIDER PISTOL
Before proceeding, please make sure to CAREFULLY read the warning seen in the section
“G
ENERAL HINTS FOR THE USE OF FIREARMS” in this booklet.
This gun is to use only caps ( rws 1075 type) to shoot the pellet.
We strongly recommend not to use any kind of black powder, nor any smokeless powder.
See exploded view at
page 7a of this booklet.
1) Cock the hammer (part. # 7).
2) Extract the special nipple (part. # 8) turning it counterclockwise.
3) Into the nipple chamber insert a lead pellet of the proper caliber size.
4) Reassemble the nipple to the barrel’s chamber, turning it clockwise till it gets fixed to the
proper seat on the frame.
5) Put a cap on the nipple.
N
OW YOUR DERRINGER RIDER IS READY TO SHOOT.
WARNING
It is suggested to wear safety glasses and gloves to be protected from possible caps chips.
BE AWARE: Even if it is a gun of reduced dimension, it is not a toy and it can be quite dangerous if
shot without observing the necessary safety rules, or inside closed areas, where the pellet may
rebound striking, causing serious accidents.