User`s manual
4.4 Set Communication
Select “Set Com” Option, the following message appears:
• Machine ID: Terminal unique ID (range: 1 to 255).
• Baud Rate: Choose from 9600, 38400, or 115200.
• IP address: Enter the IP address according to your networking options. The default IP address is
192.168.1.204.
•
Subnet Mask: Networking connection with the terminal setup.
• Default Gateway:
Networking connection with the terminal setup.
• Port #: TCP communication port, the default setting is 5005.
• Password: Set a password (range 1 to 999999)
• Server IP: Enter the IP address according to your networking options. The default IP address is
192.168.1.200.
• Server Port:
Networking connection with the terminal setup.
• Server Required: Gives you the option to require a server.
4.5 Access Control
Features
• Grouping access control
• Access control and simple attendance records included
• Inner integrated single door controller, simple installation.
• Red and green lights on the panel
• Device removal alarm function
• Standard access control steel installation
• Internet management software, monitor several machines
• USB flash drive downloads
• 26 standard output (optional), compatible to other access controller
• Adopt WFS6.00 High-speed algorithm
21