User`s manual

(c) To test the connection, plug network cable into COM2 port on the bottom of
the terminal and the appropriate hub in your network. On your computer, Ping the
terminal by inputting ping
ping
ping
ping
your
your
your
your
terminal
terminal
terminal
terminal
IP
IP
IP
IP
address
address
address
address
-t
-t
-t
-t
(For Microsoft ® Windows
XP, Windows VISTA, and Windows 7, you can ping the terminal by inputting the
above information in the Search box once you click Start
Start
Start
Start
). If connection is made,
the following appears:
d) Open your David-Link Time Management Software (DLTMS), select
"Download", click on "Setting" and input the appropriate Device ID and IP address
stored in the terminal (make sure the appropriate terminal is selected).
4) Press [Esc] to exit and [Ok] to save changes.
IP
IP
IP
IP
Address
Address
Address
Address
Terminal
Terminal
Terminal
Terminal
IP
IP
IP
IP
Address
Address
Address
Address
XXX . XXX . X.
The first 3 sets of IP Address to be
stored in the terminal should be
identical as the first 3 sets of IP Address
in you network.
YYY
The last set of IP Address to be stored in
the terminal should be a 3-digit unique
value. It strongly recommended that the
last set of IP address to be stored in the
terminal should be at least 201 and up.
User Manaul 21