User`s manual

Terminal-to-PC

Connection:

(a) On your computer, go to "Local Area Connection", right click and select

"Properties", Click on "Internet Protocol Version 4 (TCP/IPv4)" and select

"Properties". It is recommended to input the IP address as 192.168.1.200

192.168.1.200

and leave

everything else as it is.

(b) On your terminal, Set IP Address as 192.168.1.201

192.168.1.201

and leave everything else as

it is.

the terminal and the appropriate Ethernet port on your computer. On your

computer, Ping the terminal by inputting

ping

192.168.1.201

-t

(For Microsoft ®

Windows XP, Windows VISTA, and Windows 7, you can ping the terminal by

inputting the above information in the

box once you click Start

Start

menu). If

connection is made, the following appears:

d) Open your David-Link Time Management Software (DLTMS), select

"Download", click on "Setting" and input the appropriate Device ID and IP address

stored in the terminal (make sure the appropriate terminal is selected).

Terminal-to-Hub

Connection

(a) On your computer, double-click on "Local Area Connection" and select

"Details" to check your network IP Address.

(b) On your terminal, input the IP Address as the following:

XXX . XXX . X . YYY

20 User Manaul