User`s manual

3.3

3.3.1

User/Admin

Fingerprint

1) Press [MENU], select “ Register ” , press [OK], select “ User ” , press [OK]. Select

"New Reg" to enroll a new user, or select "Backup" to enroll new fingerprint

template to an existing user. Five enrollment methods are displayed, select

“ Finger ” , press [OK]. The following screen is displayed:

2) The terminal automatically suggests an available User ID number to you in

sequence. Input the desired User ID number (range is 1 to 65534). Press [OK]. The

following appears:

How to

position the

finger?

Place finger flat with pressure on the center of

the sensor surface; DO NOT touch the sensor in

an angled or tilted position, DO NOT slide your

finger.

Fingerprint

pattern change

The verification process can be affected if an

user punch in/out with a worn or injured finger.

Use an alternate finger or select 1:1 verification

mode.

Others

Very few people ’ s fingerprint quality is too poor

to be verified. Use User ID & Fingerprint

verifica tion method, or lower the 1:1 Threshold.

Otherwise use Password or Proximity Card

Verification Method (available in model W-

1288 P and W- 1288 PB).

Reg Finger

ID 00000001

ESC-ESC SET-OK

User Manaul 13